The Pulverisers meet most capacity requirements and lend themselves to a wide degree of adjustments with fineness of the finished product ranging from about 60 mesh to bulk passing through 325 mesh, depending on a considerable extent to the particular material being handled. Unlike an ordinary hammer mill, it has no screens to break, wear out or clog in the crushing chamber.
| Mill Category | Screen Less |
| Model Type | UFM – 300 to UFM – 400 |
| Mill Motor Horse Power(H.P.) | 10 to 20 |
| Capacity (Range) kgs/hr/operation | 50 to 300 |
| Max. Permissible Feed size(mm) | 6 to 6 |
| Fineness range | 200 to 400 mesh BSS & Finer |
| Abrasiveness & Hardness handled | Medium & up to 3 on Moh’s Scale |
The Pulverisers meet most capacity requirements and lend themselves to a wide degree of adjustments with fineness of the finished product ranging from about 60 mesh to bulk passing through 325 mesh, depending on a considerable extent to the particular material being handled. Unlike an ordinary hammer mill, it has no screens to break, wear out or clog in the crushing chamber.
| Mill Category | Screen Less |
| Model Type | UFM – 300 to UFM – 400 |
| Mill Motor Horse Power(H.P.) | 10 to 20 |
| Capacity (Range) kgs/hr/operation | 50 to 300 |
| Max. Permissible Feed size(mm) | 6 to 6 |
| Fineness range | 200 to 400 mesh BSS & Finer |
| Abrasiveness & Hardness handled | Medium & up to 3 on Moh’s Scale |
